Coolwell Waveshare 1.14inch LCD Display Module For Raspberry Pi Pico, Embedded ST7789 Driver, 65K RGB Colors, 240×135 Pixels, Using SPI Bus
SPI interface, requires minimal IO pins
Coolwell
Última actualización: 30 sep. 2022
Redactor: Jano Sánchez Tapia
Compartir
Échales un vistazo: los mejores productos de Coolwell
#TOP 1
Coolwell Waveshare 1.14inch LCD Display Module For Raspberry Pi Pico, Embedded ST7789 Driver, 65K RGB Colors, 240×135 Pixels, Using SPI Bus
#TOP 2
PCIe TO USB 3.2 Gen1 Adapter Designed For Raspberry Pi Compute Module 4 IO Board(CM4), 4X High Speed USB Ports,Compatible with USB 3.0/2.0/1.1
#TOP 3
Coolwell 1.44inch LCD Display Module Hat For Raspberry Pi Pico Series, Embedded ST7735S Driver,65K RGB Colors, 128×128 Pixels, Using SPI Bus
* Cada uno de los productos que recomendamos ha sido seleccionado de forma independiente y revisado por nuestro equipo de redacción basándose en un exhaustivo análisis de datos. Si haces clic en los enlaces de los productos, es posible que ganemos una comisión por las compras que cumplan los requisitos.
Los 18 mejores productos de Coolwell con comparativas
PCIe TO USB 3.2 Gen1 Adapter Designed For Raspberry Pi Compute Module 4 IO Board(CM4), 4X High Speed USB Ports,Compatible with USB 3.0/2.0/1.1
Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header
Coolwell 1.44inch LCD Display Module Hat For Raspberry Pi Pico Series, Embedded ST7735S Driver,65K RGB Colors, 128×128 Pixels, Using SPI Bus
128×128 resolution, 65K RGB colors, clear and colorful displaying effect
Coolwell XBee USB Adapter UART Communication Board, XBee Interface, USB Interface,Onboard Buttons/Leds
Program/Configure XBee modules: make it easy to program/configure the XBee modules frequently
Coolwell Waveshare 10-DOF IMU Sensor Module For Raspberry Pi Pico, Onboard ICM20948 9-Axis Motion Sensor and LPS22HB Chip Stackable Header Design
Onboard ICM20948 (3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer) for detecting motion gesture, orientation, and magnetic field
Digital LTR390-UV Ultraviolet Sensor Module (C), Direct UV and Ambient Light Intensity Index Value Output, I2C Interface
Embedded ADC, direct light intensity value output via I2C bus, less noise interference
Mini Base Board (A) Designed for Raspberry Pi Compute Module 4 Suitable for CM4 Lite/EMMC Series Module
Connecting With Compute Module 4: Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header; Suitable For Compute Module 4 Lite/EMMC Series Module
Coolwell Waveshare Raspberry Pi 400 GPIO Header Adapter, Header Expansion, 2X 40PIN Header Module Hat
Color-Coded Header, Easy Expansion
RP2040-Zero Based On Raspberry Pi Microcontroller RP2040, Low-Cost, High-Performance Pico-Like MCU Board, USB-C Connector
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
Raspberry Pi Pico Board Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Chip Featured Dual-Core Arm Cortex M0+, Flexible Clock Running up to 133 MHz
USB 1.1 with device and host support;Accelerated floating-point libraries on-chip
Coolwell Waveshare SX1262 Lora Hat for Raspberry Pi/Arduino/STM32 Spread Spectrum Modulation up to 81 Available Signal Channel 868MHz Frequency Band Allows Data Transmission up to 5km
LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference;Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
GPIO Expander Hat Board For Raspberry Pi Pico Series, 1x Raspberry Pi Standard 40PIN, 1x Pico 2×20PIN for Direct Attaching
1x Raspberry Pi standard 40PIN header and 1x Pico 2×20PIN header, allows connecting both Raspberry Pi HATs and Pico expansion boards
Industrial 6-Channel Relay Module For Raspberry Pi Zero WH,with ABS Protection Case, RS485/CAN Bus, Power Supply Isolation & Photocoupler Isolation
Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
PL2303 USB To UART (TTL) Communication Module, USB-C Connector,Adopts PL2303GS New Version Device,Compatible 1.8V/2.5V/3.3V/5V Logic Level
Supports windows XP/7/8/10/11/....
Coolwell, PoE Ethernet/USB HUB Box Compatible Raspberry Pi Zero Series, with PoE/Eth/USB HUB Hat Inside, 802.3af-Compliant, Includes 3X USB 2.0 Ports
PoE (Power over Ethernet) feature, 802.3af-compliant
Coolwell Waveshae 5inch Capacitive Touch Display For Raspberry Pi Series and CM3/3+, 800×480, DSI Interface Up to 5-Points Touch
Supports Raspbian, 5-points touch, driver free; Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free; Supports Retropie, driver free
Raspberry Pi Pico Board with Pre-soldered Header Flexible Microcontroller Board Based The Raspberry Pi RP2040 Chip Featured Dual-Core Arm Cortex M0+
USB 1.1 with device and host support;Accelerated floating-point libraries on-chip
High-Precision AD Hat Compatible with Raspberry Pi Series & Jetson Nano, ADS1263 10-Ch 32-bit ADC
with embedded 24-bit auxiliary ADC, internal ADC test signal, IDAC, 2.5V internal reference voltage, 8x multiplexing GPIO, PGA (32 times Max)
